Install Kitchen Faucet. This old house plumbing and heating expert richard trethewey heads to colorado to help a homeowner install a new kitchen sink and faucet. Close the valve, turn on the main water valve and check for leaks. Feed the supply tubes through the hole in the sink deck, and center the faucet body over the hole.
How to Install a Kitchen Faucet Home. Made. Interest. from www.homemadeinterest.com
Drop in the new faucet. There are 10 steps to completing this project:
Feed The Supply Tubes Through The Hole In The Sink Deck, And Center The Faucet Body Over The Hole.
Fit the gasket around the base of the faucet if one is included. There are 10 steps to completing this project: Next, wrap plumber's tape around the threads on the new faucet, and apply silicone sealant around the sink holes. Refer to the manufacturer's instructions.
To Install A Faucet, Start By Shutting Off The Water Valves Under The Sink And Disconnecting The Hot And Cold Supply Lines With A Wrench.
Place the rubber or plastic gasket, or trim ring, over the faucet holes in the sink and set the deck plate. This cost varies based on factors like whether you're replacing an existing faucet or not. Take a small strip of the teflon tape and wrap it clockwise around the threads of pipelines. 1 | number of holes:
Loosen The Nut Under The Faucet.
Then use a screwdriver to pry the nut away from the faucet body. Learn how to install your moen pullout kitchen faucet yourself. (see below for a sh. Turn off the sink’s water supply.
Disconnect The Water Supply Lines.
To install a kitchen faucet, you’ll want to clear out your space and sink first. Place a bucket under the faucet and turn the faucet on to check for leaks. Then, turn off the water and disconnect the hose. Antique champagne brass | number of handles:
Tidak ada komentar untuk "Install Kitchen Faucet"
Posting Komentar